Changing User Codes And Attributes - Lcd Keypad; Changing A User Code - Pyronix Matrix 424 User Manual

5 . 1 2 C h a n g i n g U s e r C o d e s a n d A t t r i b u t e s – L C D K e y p a d

5.12.1 Changing a User Code

Follow this procedure if you want to change a user's code only:
keys to navigate to "CHANGE CODES". The following display will be shown:
Use the and
Press to select this option.
The following display will be shown:
Use the and keys to select the required user.
The user number (1-32) will be displayed on the top right hand corner of the display, and the user name will be
displayed on the bottom line.
Note: At this stage you can exit the CHANGE CODE function by pressing the
Press to select the user you wish to edit.
The following display will be shown:
Enter the new code for this user followed by
The following display will be shown:
Enter the new user code again, followed by
will return to the main menu.
RINS915-2
if less than 6 digits
if less than 6 digits, an acceptance tone will be heard and you
Matrix User Guide
key.
Page: 35