Entering User Mode; Exiting User Mode - Pyronix Matrix 424 User Manual

5 . 2 E n t e r i n g U s e r M o d e
For functions such as viewing the log, changing user codes and changing the time etc. you must first enter user
mode. If hidden display mode is enabled, you must exit this before entering user mode. This ensures system
information cannot be changed or viewed by unauthorised users.
Icon Keypad
You can only enter user mode if one or more of your
assigned partitions are disarmed.
Enter TUV
If your code has been accepted you will hear a
confirmation tone, the disarmed icon (ã) will flash
and the OK icon (y) will extinguish. This indicates
that you are in user mode.
Once in user mode you can select the user mode
functions as described below.
Note: If you enter user mode and fail to
press any key for a while, user mode will
expire and the keypad will return to day
mode.
This timeout period is 20 seconds if hidden
display mode is enabled and 2 minutes if
hidden display mode is not enabled.
5 . 3 E x i t i n g U s e r M o d e
Icon Keypad
To exit the User mode, press
icon (ã) will stop flashing and the OK icon (y) will
re-appear.
RINS915-2
To enter User mode press
user code
the user menu, press the
key multiple times toggles entry to the user menu.
An acceptance tone will be heard and the following
display will be shown:
Note: If you enter user mode and use no
functions, the panel will automatically
time out and exit the user menu.
The time out period is 20 seconds if hidden
display mode is enabled, and 2 minutes if
hidden display mode is not enabled.
. The disarmed There are two methods of exiting user mode:
1. Scroll to the end of the main user menu using the
The following screen will be displayed:
Press
2. Whilst in user menu hold the
seconds, which automatically exits user mode.
However this does not work whilst you are inside a
user function.
LCD Keypad
. If you do not wish to enter
LCD Keypad
key.
to exit user menu
Matrix User Guide
once and enter your
key again. Pressing this
key down for 2
Page: 25