Engine Assembly And Adjustment - Yamaha VMX12H Supplementary Service Manual

3-55

ENGINE ASSEMBLY AND ADJUSTMENT

ENG IN E ASSEMBLY AND
ADJUSTMENT
LOWER CRANKCASE
1. Install:
pump idle gear
2. Install :
cam
,
Shift forks (No. 1
Guide bars
NOTE:
All numbers should face the left side and be in
sequence (1, 2, begining from the left.
3. Install:
Bearing retainer (shift cam)
4.
Tighten:
(bearing retainer)
Screws (Bearing Retainer):
LOCT I
7 Nm (0.7
5.
Rotate the shift cam to neutral position.
6. Install:
cam stopper lever
spring
Washer
Bolt (shift cam stopper lever)
7. Tighten:
Bolt (shift cam stopper lever)
Bolt (Shift Cam Stopper Lever):
8 Nm (0.8
LOCTI
NOTE:
Check for smooth operation after tightening the
stopper lever.
5.1
kg, 5.8