For Middle Gear Service - Yamaha VMX12H Supplementary Service Manual

SPECIAL TOOLS
1-9

FOR MIDDLE GEAR SERVICE

1.
Universal Joint Holder
YM-04062
P/N
i s used when adjusting the gear lash
This tool
in the middle gear.
2.
Middle Drive Gear Holder
YM-33222
P/N
This tool is needed when measuring the middle
gear lash.
3.
Damper Spring Plate
YM-33286
P/N
This tool is used with a middle drive gear holder
t o disassemble and reassemble the middle gear
damper.
4.
Dial Gauge
YU-03097
P/N
is used to measure the gear lash for
This tool
the middle gear and final gear.
5. 55
mm Offset Wrench
YM-04054
P/N
is used to loosen and tighten the drive
This tool
shaft nut.