Yamaha VMX12H Supplementary Service Manual page 204

ENGINE ASSEMBLY AND ADJUSTMENT
3.
Tighten:
nuts or bolts
By the following specification torque.
Clutch Release Cylinder:
12 Nm (1.2
Middle Gear Case Cover:
10 Nm (1.0
Change Pedal
:
10 Nm (1.0
Footrest (Left) :
40 Nm (4.0
Footrest (Right) :
23 Nm (2.3
Rear Brake Master Cylinder:
23 Nm (2.3
4. Adjust:
Rear brake switch
0
Refer t o "CHAPTER
SWITCH ADJ USTM ENT" section,
5. Bend the tabs on the air baffle plate
(front) as shown.
6. Adjust:
cable (V-boost)
Refer to "CHAPTER
V-BOOST" section.
7. Tighten:
nuts or bolts.
the following specification torque.
By
7 Nm (0.7
Radiator Cover:
4 Nm (0.4
Carburetor Joint:
10 Nm (1.0
8.7
7.2
7.2
29
17
17
2.
REAR BRAKE
CARBURETION,
5.1
kg, 2.9
7.2
3-80