Servo Motor; Engine Removal; V-Boost - Yamaha VMX12H Supplementary Service Manual

ENGINE REMOVAL

3-7

SERVO MOTOR

1. Remove:
*Screws (servo motor bracket)
*Servomotor
2.
Disconnect:
*Servo motor coupler
ENGINE REMOVAL
1. Place suitable stand under the engine.
a
2.
Remove:
*Bolt (engine)
*Bolts (down tube)
*Down tube frame (right)
3.
Remove:
*Engine assembly
from right side.
NOTE:
Remove the rear cylinder head cover if diffi-
culties are encountered with any of the previous
steps.

V-BOOST

1. Remove:
assembly
NOTE:
Working in a crisscross pattern, loosen the bolts
1/4 turn each. Remove them after all are
loosened.