Wheel Bearings Check - Yamaha VMX12H Supplementary Service Manual

WHEEL BEARINGS CHECK/TIRES CHECK
2-31
the lock washer
NOTE:
Make sure the lock washer tab i s placed in
the slots.
the steering crown
the steering stem nut
Nut (Steering Stem) :
110 Nm (1 1.0 m-kg, 80 ft-lb)
11. Install:
in above l i s t (steps "6
Handlebar Lower Holder:
40 Nm (4.0 m-kg, 29 ft-lb)

WHEEL BEARINGS CHECK

Front Wheel
1. Check:
Front wheel bearings
Raise the front end of the motorcycle, and
spin the wheel by hand. Touch the axle or
front fender while spinning the wheel.
Excessivevibration
Rear Wheel
1. Remove:
Rear wheel
2. Check:
movement
With the fingers.
Roughness/Wear Replace.
TIRES CHECK
Do not attempt to use tubeless tires on a wheel
designed for tube type tires only. Tire failure
and personal injury may result from sudden
deflation.
.
and tighten
to specification.
2")
I
Replace bearings.