Assembly - Yamaha VMX12H Supplementary Service Manual

RADIATOR AND CONDUIT
2.
Inspect:
*Vacuum valve spring
Fatigue
*Vacuum valve seating condition
Poor condition
3.
Measure:
*Valve opening pressure
By the following measurement steps.
Valve opening pressure measurement steps:
the radiator cap pressure using the
Radiator Cap Tester
Valve opens a t pressure below specified valve
or defective
-
Valve Opening Pressure:
73.6 103.0
10.7 14.9

ASSEMBLY

When installing the radiator and conduit,
reverse the removal procedure. Note the
following points.
1. Install:
Conduit
Screws (Conduit):
7 Nm (0.7
2. Connect:
hoses and leads (conduit)
NOTE:
Align the hose match marks
match marks
3. Install:
assembly
Bolts (Radiator):
7 Nm (0.7
4. Fill:
*Cooling system
Refer to "COOLANT REPLACEMENT"
sect ion.
Replace.
Replace.
(YU-24460).
Replace.
-
(0.75 1.05
5.1
with the
on the conduit.
5.1
4-12