FRONT AND REAR BRAKE
NOTE:
If bleeding is difficult, it may be necessary to
let the brake fluid system stabilize for a few
hours. Repeat the bleeding procedure when
the tiny bubbles in the system have
pered.
j. Add brake fluid t o the level line on the
reservoir.
BRAKE DISC INSTALLATION
1. Install:
Brake
NOTE:
brake disc should be installed with the
arrow mark
arrow mark
toward the rotating direction
2. Tighten:
Bolts (disc)
Bolts (Brake Disc):
20 Nm (2.0
face outward.
on the disc must point
of the wheel.
14
6-20