Yamaha VMX12H Supplementary Service Manual page 121

/ - -
HEADLIGHT BULD REPLACEMENT
NOTE:
If a torque wrench is not available when you are
installing a spark plug, a good estimate of the
correct torque is 1/4 to 1/2 turns part finger
tight. Have the spark plug torqued to the correct
value as soon as possible with a torque wrench.
HEADLIGHT BULB REPLACEMENT
1. Remove:
2. Disconnect:
3.
Remove:
Do not touch headlight bulb when
bulb generates enormous heat; keep flammable
objects away.
4. Install:
Avoid touching glass part of bulb. Also keep
free from oil otherwise, transparency of glass,
bulb life and illuminous flux will be adversely
affected. If oil
moistened thoroughly with alcohol or lacquer
thinner.
Don't touch
5. Install:
Headlight lens unit
lens unit leads
Turn the bulb holder
to release bulb.
(new)
Secure the new bulb with the bulb holder.
on bulb, clean
gets
lens unit
counterclockwise
is on as the
it
it
with a cloth
it
2-38