Yamaha VMX12H Supplementary Service Manual page 241

REMOVAL
Securely support the motorcycle so
over when the front wheel.
1. Place the motorcycle on i t s centerstand.
2. Remove:
@Speedometer c able
3.
Remove:
Fork brace
Front fender
4. Loosen:
bolt (front axle)
Front axle
5. Elevate the front wheel by placing a suitable
stand under the engine.
6. Remove:
Front axle
Front wheel
Lower the wheel until the brake discs come
off the calipers. Turn the brake calipers out-
ward so they do not obstruct the wheel.
NOTE:
Do
not squeeze the brake lever while the wheel is
off the motorcycle.
I NSPECT I ON
1. I nspect:
Tire tread shows crosswise lines (minimum
tread
Minimum Tire Tread Depth:
1.0 mm (0.04 in)
Tread depth Side wall
won't fall
it
Repalce.
Wear indicator
6-2