Adf Transport Drive Motor Bracket Assembly W/Cable Removal - Lexmark X651de Service Manual

Sensor (ADF media exit) fan bracket assembly removal (X654, X656, and X658)
1. Remove the ADF cover, front. See
2. Remove the ADF rear cover. See
3. Open the ADF top door assembly.
4. Disconnect the ground strap, the fan (CN12) harness, and the media exit sensor (CN9) harness.
5. Remove the two screws (A) on the front and rear of the sensor (ADF media exit) fan bracket assembly.
6. Remove screw (B) from the ground strap.
7. Remove the sensor (ADF media exit) fan bracket assembly.

ADF transport drive motor bracket assembly w/cable removal

1. Remove the ADF cover, rear. See
2. Remove the ADF transport drive motor bracket tension spring (A).
3. Remove the wires from the retaining clip (B) on top of the bracket.
4. Disconnect the ADF transport drive motor harness.
"ADF cover, front removal" on page
"ADF cover, rear removal" on page
"ADF cover, rear removal" on page
4-59.
4-60.
4-60.
Repair information
7462
Previous
Next
Go Back
4-71