4-bin mailbox assembly deflector gate (bin 1 through 3) removal
1. Remove the 4-bin mailbox assembly rear door assembly. See
assembly removal" on page
2. Remove the 4-bin mailbox assembly right rear inner cover.
3. Remove the 4-bin mailbox assembly spring. See
page
4-228.
4. Grasp the deflector gate and pull it out of its socket on each side. Carefully remove the diverter from the
machine.
4-222.
"4-bin mailbox assembly spring removal" on
"4-bin mailbox assembly rear door
Repair information
7462
Previous
Next
Go Back
4-229