Transfer Roll Bracket Assembly, Left Removal - Lexmark X651de Service Manual

Transfer roll assembly removal
1. Open the operator panel door assembly.
2. Remove the print cartridge.
3. Gently unsnap the transfer roll assembly from the machine.
4. Remove the transfer roll assembly.
Replacement Warning: When replacing the transfer roll assembly, do not touch the foam surface.

Transfer roll bracket assembly, left removal

1. Remove the transfer roll assembly. See
2. Remove the inner deflector. See
3. Remove the screw (A) securing the transfer roll bracket assembly, left to the machine.
4. Remove the transfer roll bracket assembly, left.
5. Remove the roll clamp (B) from the transfer roll bracket assembly, left.
6. Remove the bushing (C).
7. Remove the spring (D).
8. Remove the screw (E).
"Transfer roll assembly removal" on page
"Inner deflector removal" on page
4-53.
4-18.
Repair information
7462
Previous
Next
Go Back
4-53