Sensor (Fuser Output) Static Jam Service Check; Sensor (Narrow Media) Late Jam Service Check - Lexmark X651de Service Manual

7462

Sensor (fuser output) static jam service check

Use this procedure for the following jams:
• 202.06
• 202.63
Step
Check the media path for partially fed or jammed media.
1
Is the media path free from partially fed or jammed media?
Check the sensor (fuser output) for proper operation.
2
1. Enter the diagnostic mode
2. Select Base sensor test
3. Observe the line item "input"
Does the display on the operator panel, change every time
the sensing area of the above sensor is interrupted or
blocked.
Check the above sensor for proper connection.
3
Is the above sensor connected properly?
Perform a print test.
4
Does the problem remain?

Sensor (narrow media) late jam service check.

Use this procedure for the following jams:
• 201.04
• 201.56
Step
Check the media size setup and tray guides for all media
1
trays.
Does the media size, in use, match the size set for all media
trays?
Check all the media trays for proper media installation.
2
Is the media properly installed in all the media trays?
Check the fuser unit assembly for damage and life
3
expiration.
Is the above component damaged or has it exceeded life?
Check the fuser unit assembly for obstructions.
4
Is the above component free from obstructions?
Service Manual
2-136
• 202.13 • 202.31
• 202.81 • 202.88
Check
• 201.06 • 201.29
• 201.79 • 201.81
Check
• 202.38 • 202.56
Yes
Go to step 2. Remove any pre-
staged or jammed
media.
Go to step 4. Go to step 3.
Replace the fuser Replace the
unit assembly. connection.
Go to
"Fuser unit
assembly
removal" on
page 4-16.
Contact next Problem resolved.
highest level of
tech support.
• 201.31 • 201.54
Yes
Go to step 2. Replace the
media, or change
the media size
setup.
Go to step 3. Remove and
properly re-install
the media.
Replace the fuser Go to step 4.
unit assembly.
Go to
"Fuser unit
assembly
removal" on
page 4-16.
Go to step 5. Remove
obstructions.
Previous
Next
Go Back
No
No