Call Hold (Hold)-By Isdn - Panasonic KX-NS1000 User Manual

4.1.2 Integrated Services Digital Network (ISDN) Service Features
4.1.2.6 Call Hold (HOLD)—by ISDN
Description
An ISDN call can be put on hold using the ISDN service of the telephone company, instead of the PBX feature.
This can be a part of a Call Transfer (CT)—by ISDN (® 4.1.2.7 Call Transfer (CT)—by ISDN) and Three-party
Conference (3PTY)—by ISDN (® 4.1.2.8 Three-party Conference (3PTY)—by ISDN). This feature allows an
ISDN call to be held, and a call to be made to another outside party using only one communication channel of
ISDN. A PT user can easily use this feature by pressing the ISDN Hold button.
Conditions
•
This feature complies with the following European Telecommunication Standard (ETS) specification:
–
ETS 300 141 Call Hold (HOLD) supplementary service.
•
ISDN Hold Button
A flexible button can be customised as the ISDN Hold button.
•
The availability of this feature is dependent on the contract with the telephone company.
•
The TRS/Barring feature is applied when making a call after activating this feature. (® 2.7.1 Toll Restriction
(TRS)/Call Barring (Barring))
•
ARS cannot be applied to the call dialled after activating this feature. (® 2.8.1 Automatic Route Selection
(ARS))
•
It is impossible to seize any other trunk during this feature.
PC Programming Manual References
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features—
12.1.4 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button—
12.2.3 PBX Configuration—[4-2-3] Extension—Portable Station—Flexible Button—
Feature Guide References
2.21.2 Flexible Buttons
334 Feature Guide
ISDN Hold
Type
Type