Tenant-To-Tenant Call Block - Panasonic KX-NS1000 User Manual

5.1.3 Tenant Service
Tenant No.
:
*1
Follows the system assignment of a PBX operator.
® 10.2 PBX Configuration—[2-2] System—Operator & BGM—
*2 Follows the system assignment of the ARS mode.
® Section 16 PBX Configuration—[8] ARS
*3 Follows the system assignment of the music source for the Music on Hold.
® 10.2 PBX Configuration—[2-2] System—Operator & BGM—
*4
Follows the system assignment for System Speed Dialling.
® 14.1 PBX Configuration—[6-1] Feature—System Speed Dial
Conditions
•
One-look Networking (® 4.2 One-look Networking)
For features whose operation depends on Time Service (® 5.1.4 Time Service), system programming
specifies which PBX's clock is used to determine the time mode.
® 14.6 PBX Configuration—[6-6] Feature—Tenant—
•

Tenant-to-Tenant Call Block

The following features can be restricted based on the COS for each extension (not based on the tenant)
by the Internal Call Block feature (® 2.1.2.2 Internal Call Block):
–
Calling extensions or doorphone(s) in the restricted tenant(s)
–
Picking up calls ringing in the restricted tenant(s)
–
Retrieving a call held within the restricted tenant(s)
[Example]
Tenant 1
Extension
User Group 1
Extn. 100 Extn. 101
1
COS
Extension
User Group 2
Extn. 102
428 Feature Guide
Operator ARS Mode
:
2
COS
Extn. 103
5
COS
Music Source
: :
PBX Operator—Day, Lunch, Break, Night
BGM and Music on Hold—Music on Hold
Time Service Mode
Tenant 3
Extension
User Group 5
Extn. 108 Extn. 109
COS
Extension
User Group 6
Extn. 110 Extn. 111
System Speed Dialling
:
Tenant 2
Extension
User Group 3
Extn. 104 Extn. 105
3
COS
Extension
User Group 4
Extn. 106 Extn. 107
6
4
COS