Calling/Connected Name Identification Restriction (CNIR/CONR):
It is possible for each extension to restrict the sending of its extension name to the QSIG network. When CLIR
is activated, CNIR becomes active automatically. When COLR is activated, CONR becomes active
automatically.
Conditions
•
These features comply with the following European Telecommunication Standard (ETS) specifications:
–
CLIP/COLP: ETS 300 172 Circuit mode basis services.
–
CNIP/CONP: ETS 300 238 Name identification supplementary services.
•
COLP/CLIR/COLR/CNIP/CONP/CNIR/CONR Assignment for Each Port
Each service can be enabled or disabled on each ISDN (QSIG) port of the PBX.
•
CLIR Button and COLR Button
It is possible to switch between CLIP and CLIR by pressing the CLIR button, and COLP and COLR by
pressing the COLR button. A flexible button can be customised as the CLIR or COLR button.
PC Programming Manual References
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - BRI Port—Supplementary Service—
COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT, CCBS, AOC-D, AOC-E, 3PTY
9.28 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port—Supplementary Service—
COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT, CCBS, AOC-D, AOC-E, E911, 3PTY
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features
→
COLR Set / Cancel
→
CLIR Set / Cancel
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Main
→
Extension Number
→
Extension Name
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Main
→
Extension Number
→
Extension Name
Feature Guide References
2.21.2 Flexible Buttons
User Manual References
1.9.4 Displaying Your Telephone Number on the Called Party and Caller's Telephone (Calling/Connected Line
Identification Presentation [CLIP/COLP])
1.9.5 Preventing Your Telephone Number Being Displayed on the Caller's Telephone (Connected Line
Identification Restriction [COLR])
1.9.6 Preventing Your Number Being Displayed on the Called Party's Telephone (Calling Line Identification
Restriction [CLIR])
4.3.4 QSIG Standard Features
Feature Guide
395