Legacy Device Connection; Stacking Connection - Panasonic KX-NS1000 User Manual

5.3.1 Stacking Connection

5.3 Legacy Device Connection

5.3.1 Stacking Connection
Description
KX-TDA/KX-TDE/KX-NCP series PBXs can be connected to a KX-NS1000 PBX via a stacking connection and
used to connect telephones, devices, and trunks that are not natively compatible with the KX-NS1000. Such
items include DPTs and APTs, DSS Consoles, digital CSs (i.e., non-IP), E1 trunks, and T1 trunks.
A PBX connected through a stacking connection is referred to as a "legacy gateway".
PBX
Legacy Gateway
KX-NS1000
PBX
Legacy Gateway
KX-UT
IP-PT
IP-PT
Site 1
All programming can be done through Web Maintenance Console on the KX-NS1000.
Conditions
•
Hardware Requirement: STACK-M card (KX-NS1000) and a STACK-S card (for each legacy gateway).
•
The KX-TDA15 and KX-TDA30 are not supported for stacking.
•
The following features are available through a legacy gateway:
–
Parallelled Telephone
–
E1 Line Service
–
T1 Line Service
–
Voice Mail (VM) Group
–
Voice Mail DTMF Integration
468 Feature Guide
PBX
Private IP Network
(One-look)
Site 3
PBX
STACK-M
KX-NS1000
PBX
KX-NS1000
Site 2
PBX
APT
STACK-S
T1 line
Legacy Gateway
PBX
STACK-S
DPT
Legacy Gateway
DSS Console
PBX
Legacy Gateway
PSTN