Simple Network Management Protocol (Snmp) System Monitor; Trap Implementation - Panasonic KX-NS1000 User Manual

5.6.5 Simple Network Management Protocol (SNMP) System
Monitor
Description
It is possible for a PC assigned as an SNMP manager to manage and receive PBX system status information,
such as alarm information and general system activity using SNMP. Management Information Bases (MIBs)
are sent to a PC (i.e., the SNMP manager) connected to the PBX over a LAN and can then be stored and
analysed using SNMP manager software.
The two features for managing information using SNMP are as follows:
–
Polling:
A bilateral transaction of information. Polling allows the manager to request information from the PBX.
PBX
–
TRAP:
An automatic relay of information from the PBX when a status change occurs or an alarm is detected.
PBX

TRAP Implementation

The PBX will send the two types of TRAP as follows:
Type
Standard TRAP
Enterprise Specific
TRAP
*1
*1 Enterprise Specific TRAPs contain information exclusive to the PBX model (Enterprise Specific MIB).
Conditions
•
Through system programming, it is possible to enable or disable this feature.

5.6.5 Simple Network Management Protocol (SNMP) System Monitor

Request
Response
Sends Information
TRAP Name
coldStart
Authentication Failure
Major Alarm
Minor Alarm
PC
Manager
PC
Manager
Description
Information is sent after turning on the power of the PBX
or resetting the PBX.
Information is sent when an unregistered Community
Name and/or Manager IP address is entered.
Information is sent when a major alarm is detected.
Information is sent when a minor alarm is detected.
Feature Guide 499