Programming Example - Panasonic KX-NS1000 User Manual

Carrier Access Code
® 16.5 PBX Configuration—[8-5] ARS—Carrier—Carrier—
Trunk Group : Assign the trunk groups which connect to each carrier.
11
® 16.5 PBX Configuration—[8-5] ARS—Carrier—TRG 01–TRG 96
Modify Command
® 16.5 PBX Configuration—[8-5] ARS—Carrier—Carrier—
[Command Explanation]
Command
Number
C
P
A
G
I
H

[Programming Example]

Carrier Table
7
8 Carrier Name
Removed Number of Digits
9
Carrier Access Code
10
Trunk Group
11
12 Modify Command
[Example]
Dialled number: 0123456789
Modification:
012345 6789
6.
Optional Assignment
Authorisation Code for a Tenant
An Authorisation code can be assigned for each carrier and each tenant.
® 16.5 PBX Configuration—[8-5] ARS—Carrier—Authorisation Code for Tenant
Authorisation Code for a Trunk Group
An Authorisation code can be assigned for each trunk group and each carrier.
: Assign the code to access the carrier.
10
: Assign the commands to modify the dialled number to access the carrier.
12
Add the number.
Add the Carrier Access code.
Analogue Line: Insert a pause.
ISDN/T1/E1 Line: Insert a pause and change to tone (DTMF) signal.
Add the Authorisation code for a tenant (
Add the Authorisation code for a trunk group (
Add the Itemised Billing code (
Add the dialled number after the digits are removed (Home position).
2
1
A telecom B telecom
6 0
0077 0088
1, 2, 3 1, 2
CH#12 CH
(Trunk Access no. is ignored.)
12
0077 6789 #12
Remove 6 digits.
9
Add the Carrier Access
C
code (
13
Carrier Access Code
Modify Command
Description
).
15
H
Add the number.
#12
).
10
14
2.8.1 Automatic Route Selection (ARS)
).
13
).
14
Feature Guide 131