Floating Extension - Panasonic KX-NS1000 User Manual

Pure ip-pbx
Hide thumbs Also See for KX-NS1000:
Table of Contents

Advertisement

5.5.8 Floating Extension

Description
Virtual extension numbers can be assigned to resources to make them appear as extensions. This feature is
also known as Floating Station.
These numbers are defined as floating extension numbers and can be assigned as a destination of incoming
calls etc.
Resource
Device
External Pager
Outgoing Message
(OGM)
Group
Incoming Call
Distribution Group
PS Ring Group
VM (DPT) Group
VM (DTMF) Group
UM Group
*1
The default floating extension number depends on the value specified for Numbering Plan in Easy Setup.
*2
A default floating extension number is provided only up to group 64. The floating extension number for groups 65 and higher must
be set explicitly.
*3
In a One-look network (® 4.2 One-look Networking), 500 is the default floating extension number of the Master Unit's UM group.
For a Slave Unit, the default depends on the order in which the Slave Unit was registered.
Conditions
It is possible to give names to floating extension numbers.
PC Programming Manual References
2.1.4 Easy Setup Wizard—PBX Setting—Select the default value of Numbering Plan
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Extension
11.5.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings—Main
Floating Extension Number
Group Name
11.7.2 PBX Configuration—[3-7-2] Group—UM Group—Unit Settings—
11.8 PBX Configuration—[3-8] Group—PS Ring Group—
13.2 PBX Configuration—[5-2] Optional Device—External Pager—
13.3.2 PBX Configuration—[5-3-2] Optional Device—Voice Message—DISA Message—
Number
Description
Used as the destination for TAFAS feature.
(® 2.17.2 Trunk Answer From Any Station
(TAFAS))
Used to send messages for DISA feature.
(® 2.16.1 Direct Inward System Access
(DISA))
Used to call an incoming call distribution
group. (® 2.2.2.1 Incoming Call Distribution
Group Features—SUMMARY)
Used to call a PS ring group. (® 5.2.4.2 PS
Ring Group)
Used to call a VM (DPT) group.
Used to call a VM (DTMF) group.
Used to call a UM group.
Floating Extension Number
5.5.8 Floating Extension
Default
600 or 6000
536–599 or
58 + two-digit
number
6 or 60 +
two-digit
number
500 or
5000
Floating Extension No.
Floating Extension Number
Floating Extension
Feature Guide
*1
OGM
*1
group
*1*2
*1*3
491

Advertisement

Table of Contents
loading

Table of Contents