Panasonic KX-NS1000 User Manual page 484

5.5.5 Automatic Setup
[NTP Time Information]
•
The time set through NTP will apply the same to all PTs connected to the PBX, regardless if an IP extension
is located in another time zone.
•
The PBX provides NTP server information to KX-UT extensions (® 5.2.2.1 KX-UT Series SIP Phones) if
the NTP server setting is enabled. If an NTP server has been specified through system programming,
KX-UT extensions will retrieve their time from that server. If no NTP server has been specified, the PBX
will use its own IP address as the NTP server for the KX-UT extension.
If NTP server is disabled, the time for KX-UT extensions must be set individually at each telephone.
PC Programming Manual References
6.2 Tool—BRI Automatic Configuration
10.1.1 PBX Configuration—[2-1-1] System—Date & Time—Date & Time Setting
10.1.2 PBX Configuration—[2-1-2] System—Date & Time—SNTP / Daylight Saving
10.1.2.1 PBX Configuration—[2-1-2] System—Date & Time—SNTP / Daylight Saving—Daylight Saving
27.2.4 Network Service—[2-5] Server Feature—NTP—
Feature Guide References
4.1.2.1 Integrated Services Digital Network (ISDN)—SUMMARY
2.24.4 Timed Reminder
484 Feature Guide
NTP server