Table of Contents
Advertisement
Utility call key setting operation
2 - 54
2.3 Operation Settings (Settings Regarding Operation)
1.
Touch
or
of the setting screen.
The button repeats
touch.
Set the corner to be specified as a key position
to
.
For the key position, up to 1 point can be
specified.
When the key position is not specified,
displaying the utility with the utility call key is not
available.
2.
When setting 1 point, specify the time to switch
to the utility in case of keeping pressing the key
position.
Touch the time input area.
3.
Touching the input area displays a keyboard.
Input numerical value from the keyboard.
4.
If touch the [OK] button, the changed settings
are reflected and the screen returns to the
[Operation] screen.
If touch the [Cancel] button, the changed
settings are canceled and the screen returns to
the [Operation] screen.
5.
In the [Operation] screen, touching the [OK]/
[Cancel]/
button restarts and operates the
GOT with the changed settings.
displayed at the 4 corners
with every
Advertisement
Table of Contents
