Table of Contents
Advertisement
Channel number setting operation
Keyboard
Communication detail setting switching operation
1.
If the driver display BOX is touched on the communication setting screen or Ethernet I/F assign screen, the
screen switches to the detailed setting screen of the related controller device.
(
3.2 Communication Detail Setting)
5V power supply setting operation
When connecting a controller to the RS-232 interface, whether to supply 5VDC power or not to the controller through
9 pins can be selected.
Thus, it is not necessary to connect an external power supply.
When setting the RS-232 interface to "9" (Host (PC)), the 5V supply is automatically changed to [NO].
3 - 9
3.1 Communication Setting
1.
Touch channel number specification menu BOX
to be set.
2.
The cursor for the channel number specification
menu BOX is displayed.
Simultaneously the keyboard for a numerical
input is displayed.
3.
Input the channel number from the keyboard
and touch [Enter] key, and the value is defined.
Simultaneously, the name of the communication
driver corresponding to the channel number
assigned by GT Designer3 or GT Designer2 is
displayed in the driver display BOX.
1.
Touch [5V supply].
Advertisement
Table of Contents
