Table of Contents
Advertisement
POINT
POINT
POINT
(1) Display setting by GT Designer3 or GT Designer2
Set title display period, screen save time and screen save backlight at [GOT set up] in [Environmental Setting]
of GT Designer3 or in [System Environment] of GT Designer2.
When change a part of the setting after downloading the project data, change the setting by [Display] screen
of the GOT.
•GT Designer3 Version1 Screen Design Manual (Fundamentals)
(4.9 GOT Display and Operation Setting)
•GT Designer2 Version
(3.8 Setting of the GOT display and operation (GOT setup))
(2) Screen save time
Using the system information function can compulsorily switch the controller to the screen saving status
(Forced Screen Saver Disable Signal) or disable the screen save time (Automatic Screen Saver Disable
Signal) set with Utility.
•GT Designer3 Version1 Screen Design Manual (Fundamentals)
(4.6 System Information Setting)
•GT Designer2 Version
(3.6 Setting System Information)
(3) Screen save backlight
When [Screen save backlight] is set to [ON], using the system information function (Backlight OFF output
signal) can switch the backlight OFF from the controller.
When [Screen save backlight] is set to [OFF], the above signal has no effect on the screen save backlight.
•GT Designer3 Version1 Screen Design Manual (Fundamentals)
(4.6 System Information Setting)
•GT Designer2 Version
(3.6 Setting System Information)
(4) Display control by human sensor
The human sensor is a function that releases the GOT from the screen saving mode without the necessity to
touch the GOT.
This function releases the GOT from the screen saving mode when the operator has come closer to the GOT.
Approach
Operator motion
"Sensor detect"
Human Sensor
Detection Signal
"System Signal 2-1.b5"
Screen saving
When there is no operator around the GOT for the time set as "Sensor OFF delay", the "Human Sensor
Detection Signal" turns OFF.
When the time set as the "Screen save time" elapses after the "Human Sensor Detection Signal" turns
OFF, the GOT enters the screen saving mode.
Refer to the following manual for the Human Sensor Detection Signal (System Signal 2-1.b5).
•GT Designer3 Version1 Screen Design Manual (Fundamentals)
(4.6 System Information Setting)
•GT Designer2 Version
Screen Design Manual
Screen Design Manual
Screen Design Manual
Go away Approach
Go away
ON
"Sensor
"Sensor
OFF delay"
OFF delay"
Screen saving mode released
Screen Design Manual (3.6 Setting System Information)
OFF
Screen saving
mode active
"Screen save time"
2.2 Display Settings
1
2
3
4
5
6
7
2 - 39
Advertisement
Table of Contents
