(5) Download operation
Transfers the special data written in the A drive (Standard CF Card), B drive (Extended memory card) or E drive
(USB drive) to the C drive (Built-in flash memory).
The GOT monitors C drive data.
(This item explains using the A drive.)
POINT
POINT
POINT
Special data to be stored in a CF card
When storing the project data from GT Designer3 or GT Designer2 to CF card, select [C: Built-in flash memory] for
[Project Data] in [Boot Drive].
6 - 78
6.2 Various Data Control
(Continued to next page)
1.
Install a CF card or USB memory on the GOT.
Refer to the following for inserting/removing
method of CF card or USB memory.
(Hardware)
8.3.2 CF card
(Hardware)
8.5.2 Install USB peripheral devices
2.
Touch [A: Standard CF Card] in Select drive.