Mitsubishi GT16 User Manual page 34

HINT HINT HINT
Locking the utility display by password
When you try to display the utility main menu while the password is set to the GOT by GT Designer3 or GT
Designer2, the display for password input will be appeared.
(The password setting of GT Designer3 is in the common menu. The password setting of GT Designer2 is in the
common menu.)
When the password is not matched, displays the error message.
When touching the [OK] button, the screen returns to the monitor screen.
(1) Input operation of password
1.
Input the password after touching [0] to [9], [A] to [F] key.
2.
Define the password by touching [Enter] key, after password input.
3.
To correct the input character, touch [Del] key to delete the correcting character and reinput/retype the new
character.
(2) Password input cancel operation
When
Refer to the following for the details related to the password setting.
1 - 10 1.3 Utility Display
button is touched, it returns to the monitor screen.
•GT Designer3 Version1 Screen Design Manual (Fundamentals)
•GT Designer2 Version Screen Design Manual