Mitsubishi GT16 User Manual page 142

POINT POINT POINT
Precautions for setting
When the trigger type is set to [Rise], set the trigger device with GT Designer3 or GT Designer2 in advance.
Failure to do so disables the backup setting with [Rise] set.
4 - 9 4.2 Debug Setting
2.
Touch a setting item for [Check the file register
changes], and then the setting is changed.
Execute : When the backup is executed,
the GOT checks if data stored in
file registers are changed after
the previous backup. When the
data are changed, the GOT
backs up the changed data.
Not : When the backup is executed,
execute the GOT does not back up data
stored in file registers even if the
data are changed after the
previous backup.
3.
When the trigger type is changed, a password
input window appears by touching the [OK]
button.
Input the password for the backup/restore.
When the password is verified, the settings are
reflected, and then the screen returns to the
[trigger backup setting] screen.
When the trigger type is not changed, touching
the [OK] button reflects the settings.
If touch the [Cancel] button, the changed
settings are canceled and the screen returns to
the [Backup/restoration] screen.
4.
When the trigger type is set to [Time], touch a
setting item for [Detail] and the screen is
switched to the trigger time setting screen.
In the screen, specify the days and time that the
GOT executes the backup.
Day : Select days that the GOT executes
the backup by touching displayed
items.
Multiple days can be selected.
Time : Set the time that the GOT executes
the backup by touching the
displayed item.