Table of Contents
Advertisement
(a) After communication driver is assigned automatically.
When saving the settings to the GOT with [OK] button after the automatic assignment of communication
driver, automatic assignment will not be performed at the next time and after.
(b) Priority against [Controller Setting] of GT Designer3 or [Communication Settings] of GT Designer2
If download the communication settings to the GOT with GT Designer3 or GT Designer2 after the
automatic assignment, the GOT will operate with the communication settings of the GT Designer3 or GT
Designer2. (The GOT operates with the latest communication settings.)
(3) When the communication driver does not match with the unit that is installed in the GOT
An error is displayed on the GOT when displaying [Communication setting].
If an error is displayed, confirm the combination of the communication driver and communication unit.
Refer to the following manual for the combination.
•GOT1000 Series Connection Manual for GT Works3 and a controller used
(System Configuration in each chapter)
•GOT1000 Series Connection Manual for GT Designer2/GT Works2
(System Configuration in each chapter)
3.1 Communication Setting
1
2
3
4
5
6
7
3 - 6
Advertisement
Table of Contents
