Table of Contents
Advertisement
Authentication operation
This section describes how to log into the GOT using the fingerprint authentication.
For details of the procedures for creating an extended function switch that displays a login button on the user-created
screen, refer to the following manual.
•GT Designer3 Version1 Screen Design Manual (Functions) (2.6 Setting Special Function Switch)
•GT Designer2 Version
6 - 104
6.2 Various Data Control
Screen Design Manual (6.2.5 Setting items of special function switch)
Login
1
Extended function switch
(Login)
Login
Login
1.
Touch the [Login] button created in the user-
created screen.
2.
The dialog box shown left is displayed.
Touch the [Password] button to display the
login screen of [Operator name + password].
For the display method of the [Password]
button, refer to the following.
6.2.7 Operator information
Touch the [Cancel] button to return to the
screen in step1.
3.
Put the registered finger on the fingerprint unit.
4.
When the fingerprint is correctly recognized,
the dialog box shown left is displayed.
Touch the [OK] button to return to the user-
created screen.
Advertisement
Table of Contents
