Table of Contents
Advertisement
6 - 86
6.2 Various Data Control
(Continued to next page)
(c) Touch the level, and then the
Operator level input dialog box is
displayed. Input an operator level.
When the input is completed, touch
the [Enter] key.
When the level of the operator being
login is changed during editing the
operator information, a new level is
not reflected until you log out of the
GOT once and log in the GOT again.
(d) For changing passwords during
editing, touch the password.
The New password input dialog box
is displayed, and then input a
password.
When the input is completed, touch
the [Enter] key.
When the password input is
completed, the New password input
confirmation dialog box is displayed.
Input the same password.
(e) For enabling the setting of [Make a
permanent password], touch the
check box for [Make a permanent
password], and then the setting is
switched.
: Disabled
: Enabled
(f) For using the external authentication
ID, touch the check box "Use ext.
auth. ID" and switch the setting.
: The external authentication ID
is not used.
: The external authentication ID
is used.
(g) Touch Ext.auth ID to display the
external authentication ID input
dialog box, and enter the external
recognition ID.
When the input is completed, touch
the [Enter] key.
When the authentication method is
set to "Fingerprint auth" or "External
auth (general)", the external
authentication ID can be input with
the external authentication device.
Advertisement
Table of Contents
