Table of Contents
Advertisement
(3) Function setting operation
(Continued to next page)
1.
Touch [Function setting] in the operator setting
menu, and then the Admin password
authentication dialog box is displayed.
2.
Input the administrator password.
Character types to be input can be changed with
touching the following buttons.
[A-Z]: Alphabet capital
[a-z]: Alphabet small letter
[0-9]: Numeric
When the input is completed, touch the [Enter]
key.
3.
When the administrator password is correctly
input, the Function setting screen in displayed.
Touch an item to be set.
(a) Automatic logout time
(b) Auth method
(c) Password expiration date
(d) Initial position input
(e) Valid byte count input
(a) Touch [Automatic logout time], and
then the Automatic logout time edit
dialog box is displayed. Input the
time.
When the input is completed, touch
the [Enter] key.
(b) Authentication method
Switch the authentication method.
Touch the item to switch the display
between [Operator name +
password]
(general) ]
[Operator name + password].
When [External auth (general)] or
[Fingerprint authentication] is
selected, the check box for [Operator
name + password] is displayed.
If the check box is selected, the login
is also enabled with [Operator name
+ password].
6.2 Various Data Control
[External auth
[Fingerprint auth]
6 - 95
1
2
3
4
5
6
7
Advertisement
Table of Contents
