Table of Contents
Advertisement
(7) Upload/setup cancel operation
(a) Upload operation
By upload operation, the project data is transferred from the C drive (Built in flash memory) to the A drive
(Standard CF card), B drive (Extended memory card) or E drive (USB drive).
The CF card or USB memory after uploading can be used for downloading project data to another GOT.
(This item explains using the A drive.)
POINT
POINT
POINT
Before setup operation
The project data cannot be uploaded to the A drive, B drive or E drive when the project data of the A drive, B drive
or E drive is set up.
Execute setup cancel (
6 - 122
6.3 OS/Project Information
(7) (b) Setup cancel operation) before uploading the project data.
1.
Touch [A: Standard CF Card] in Select drive.
2.
If touch the [Upload] button, the screen
mentioned left is displayed.
3.
Touching the [OK] button executes uploading.
4.
If any project data with the same name exists
in the A drive, the screen shown left is
displayed without starting uploading.
In this case, touching the [OK] button
overwrites the project data of the A drive with
the project data with the same name of the A
drive.
Touching the [Cancel] button cancels
uploading.
5.
When the uploading is completed, the dialog
box mentioned left is displayed.
Touching the [OK] button restarts the GOT.
Advertisement
Table of Contents
