Table of Contents
Advertisement
(3) Copy operation
Uploads the project data written in the C drive (Built-in flash memory) to the A drive (Standard CF card) / B drive
(Extended memory card) / E drive (USB drive).
• Copying to another directory in the same drive
• Copying between A drive, B drive and E drive
Copy to/from C drive is disabled.
(This item explains using the A drive.)
(Continued to next page)
1.
Install CF card in the PC, in which create a
folder for the copy destination.
Set the same character with [System
Information] of [Environmental Setting] of GT
Designer3 or with [System Setting] of [System
Environment] of GT Designer2 for the folder
name.
•GT Designer3 Version1 Screen Design
Manual (Fundamentals)
(4.1 GOT Type Setting)
•GT Designer2 Version
Manual
(3.1 GOT/Controller Type Setting)
2.
Install the CF card mentioned above to GOT.
Refer to the following for inserting/ removing
method of CF card.
(Hardware)
8.3.2 CF card
(Hardware)
8.5.2 Install USB peripheral devices
3.
Open [Project Information] screen to select the
file to copy.
4.
If touch [Copy] button, the message [Please
select a destination.] is displayed in the left
bottom of the screen.
5.
If the copy destination folder is touched, the
screen display is changed to the folder of copy
destination.
At this time, it cannot be copied into the same
folder where the file exists.
Select other folders.
6.
If touch [Exec] button, the dialog box
mentioned left is displayed.
6.3 OS/Project Information
1
2
3
Screen Design
4
5
6
7
6 - 117
Advertisement
Table of Contents
