Holiday Dates; Speaker Tones - Texecom Premier 48 Installation Manual

Programming the Control Panel

Holiday Dates

Yes
7
pqrs
Yes
Yes
??????
Yes
The system has 8 programmable holiday dates.
The holiday dates are pre-defined dates on which the Control
Timers will not operate.
Example
Control Timer 1 is programmed to operate between the hours
of 8pm and 8am on Monday through to Friday (for the
purpose of arming the control panel).
Because Bank Holidays normally fall on Mondays the panel
would disarm itself leaving the premises unprotected.
•
Christmas day 2001 falls on a Tuesday
•
Under normal conditions the Control Timer will operate
on a Tuesday
•
The 25/12/01 is programmed as a Holiday Date
•
The Control Timer does not operate on Tuesday 25
December 2001 and the premises remains protected at
all times
54
Use the SCROLL key
to select a Holiday Date
Use keys 0 - 9 to enter the
new date DD/MM/YY
e.g. 030501 = 3rd May 2001
th
Premier 48, 88, 168 & 640 Installation Manual

Speaker Tones

Yes
8
tuv
Yes
No
No
Yes
The speaker output on the control panel can be programmed
so that certain types of tones are not generated. When
deselected, Fire, Alarms, Fault, Service, Entry, Exit and
Chime tones will not be heard.
Select tones by pressing keys 1 to 8 (a letter on the display
means the tone is selected, a Dot on the display means the
tone is not selected).
F - Fire Tones On
Fire alarm tones will be generated by the control panel
sounder/speaker.
A - Alarm Tones On
Intruder alarm, Tamper alarm and PA alarm tones will be
generated by the control panel sounder/speaker.
F - Fault Tones On
Fault tones will be generated by the control panel
sounder/speaker.
S - Service Tone On
Service and Warning tones will be generated by the control
panel sounder/speaker.
E - Entry Tones On
Entry tones will be generated by the control panel
sounder/speaker.
X - Exit Tones On
Exit tones will be generated by the control panel
sounder/speaker.
C - Chime Tones On
Chime 1, 2 and 3 tones will be generated by the control panel
sounder/speaker.
Press No to edit
the sounder option
Use keys 1 - 8 to select/deselect
the sounder option or use the
SCROLL key to search
Press No to
select/deselect
the sounder option
INS176