Broker Call: Switching Between Two Calls; Joining Multiple People In A Conference - iPECS LIP-9000 Series User Manual

To place a call on Hold:
 Press the HOLD(SAVE) button

5.3 Broker Call: Switching between two calls

You may switch between the active call and a call on Hold, placing the
active call on Hold acting as a broker between two or more parties (Broker
Call). iPECS Phone users may 'broker' for multiple calls up to the number
of DN buttons on the phone.
To switch between two calls (Broker Call):
 Press the desired DN button.

5.4 Joining Multiple People in a Conference

You can establish a Conference with up to 128 parties when using VPCM
module. The other parties in the Conference may be internal or external.
You may also use the Conference operation to join two external parties in a
private conversation. This is an Unsupervised Conference, which is not
subject to the normal Hold Recall operation.
To establish a Conference:
 Establish call with one of the desired conference parties.
 Select the CONF Softkey or, if you are using an LIP-9010, use the
programmed CONF flexible button.
 Establish call with another conference party.
 Select the CONF Softkey.
 Repeat the above steps for additional parties.
 Select the CONF Softkey again to establish the conference.
To establish an Unsupervised Conference:
 Establish conference with two external parties.
 Select the CONF Softkey.
 Hang-up the handset.
To retrieve an Unsupervised Conference:
 Lift the handset.
 Select the CONF(J) Softkey.
LIP-9000 Series User Guide - CM- Issue 1.1 35