LIP-7024LD
5.3
Broker Call: Switching between two calls
You may switch between the active call and a call on Hold, placing the
active call on Hold acting as a broker between two or more parties,
Broker Call. iPECS Phone users may 'broker' for multiple calls up to
the number of CO/IP line buttons.
OPERATION
To switch between two calls, Broker Call:
•
Press the desired CO/IP line button.
5.4
Joining Multiple People in a Conference
You can establish a Conference with up to 3 parties, or 24 parties when
using a Multi-Party Conference Interface Module (MCIM). The other
parties in the Conference may be internal or external.
A Conference can be placed on Hold and is subject to
You may also use the Conference operation to join 2 external parties in a
private conversation. This is an Unsupervised Conference, which is
not subject to the normal Hold Recall operation.
OPERATION
To establish a Conference:
•
Establish call with one of the desired conference parties,
Select the Conf Soft button,
•
•
Establish call with the other conference party,
•
Select the Conf Soft button,
Select the Conf
•
To place a Conference on Hold:
•
Press the
To retrieve the Conference from Hold:
•
Select the Conf Soft button.
To establish an Unsupervised Conference:
Establish conference with two external parties,
•
•
Select the Conf
To retrieve an Unsupervised Conference:
•
Select the Conf Soft button.
Soft button again to establish the conference.
button.
/
HOLD
SAVE
Soft button.
28
User Guide
Hold
Recall.