Accessing The Setup Program - Toshiba T1950 User Manual

3.22.2

Accessing the SETUP Program

Select 0 (Setup) from the DIAGNOSTICS MENU and press Enter. The following screen
displays:
MEMORY
Total
Base
Extended
Hard RAM
Shadow BIOS ROM
DISPLAY
Display Adaptor
LCD Display Mode
LCD Gray Scale Level = Normal 64 Levels
COM/PCMCIA/FDD/PRT
Serial Port = COM1(IRQ4/3F8H)
PC Card Slot
External FDD/PRT
Printer Port Type
↑ ↓ ← → : Select items, Space, BkSp : Change values
Esc: Exit without saving, Home: Set default values, End: Save changes and Exit
NOTE: The LCD gray scale level does not appear on the T1900C screen.
3.22.3 Moving Within the SETUP Menu and Changing Values
Press ← and → to move between the two columns, and press ↑ and ↓ to move
1.
between items in a column.
2. Press either the space bar or BkSp to change the value.
3.22.4 Accepting Changes and Exiting the SETUP Window
1. Press End to accept the changes you made. The following message displays:
Are you sure? (Y/N)
(a) To make other changes, press N, then repeat the steps above.
(b) To accept the changes, press Y. The system will reboot automatically.
NOTE: You can press Esc to quit at any time without saving changes.
SETUP will ask you to confirm that you do not want to save your changes.
T1900 SETUP
HARD DISK
Capacity = **MB
= 4096 KB
= 640 KB
= 3328 KB POWER ON PASSWORD
Not Registered
= 0 KB
= 128 KB
OTHERS
Power-up Mode
= VGA Compatible
CPU Cache
= Color
Processing Speed
Battery Save Mode
Popup
= PCMCIA
Speaker
= Printer
Battery Alarm
= Output
BIOS version = x.xx
= Boot
= Enabled
= High
= Automatic
(Normal Life)
= Enabled
= Enabled
= Enabled
3-53