2.2
Troubleshooting Flowchart
Use the flowchart in Figure 2-1 as a guide for determining which troubleshooting procedures to
execute. Before going through the flowchart steps, verify the following:
Ask the user if a password is registered, and if it is, ask him or her to enter the
password. If the user has forgotten the password, connect the printer port wrap-
around board (F31PRT), then turn the POWER switch on. The computer will
override the password function by erasing the current password.
Verify with the customer that Toshiba MS-DOS is installed on the hard disk.
Non-Toshiba operating systems can cause the computer to malfunction.
Make sure all optional equipment is disconnected from the computer.
Make sure the floppy disk drive is empty.
2-2