Installing the Display Mask
To install the T1900/T1900C's display mask, follow the steps below and refer to Figure 4-14.
1.
Set the display mask in place and secure the snaps beginning with the four snaps in
the display supports, three snaps in the larger support and one snap in the small
support.
2.
Continue along the bottom of the display (two snaps), along the sides (four snaps)
and across the top (four snaps).
3.
Secure the cover with two M2.5x6 silver screws at the display hinges.
4.
Attach the two screw covers at each display hinge to cover the screws.
4-19