Toshiba T1950 User Manual page 117

5. Open the expansion memory slot cover on the right side of the unit (Figure 4-6).
6. Using a jeweler's screwdriver, remove the screw cover located above the function
keys, then remove the M2.5x10 screw (Figure 4-6).
NOTE: Be sure to use the correct screws when reassembling the top cover.
7. Unsnap the latches securing the top cover to the base assembly. Start by pressing
on the front of the top cover just in front of the space bar and rotate the keyboard's
front edge toward you to release the front latches (Figure 4-6).
8. Continue around the rim until all latches are released, then carefully lift up the top
cover (Figure 4-6).
NOTES: (1) The latch on the back left corner may catch. To release this
(2) As you remove the top cover, the RGB and PRT port protective
4-10
latch, gently jiggle the cover back and forth to free it from the
chassis.
covers will fall away from the back of the unit.
Figure 4-6 Unlatching the Top Cover