4.14 T1900C LCD Module
Removing the Color LCD Module
To remove the T1900C's color LCD module, follow the steps below and refer to Figure 4-28.
1.
Turn off the power to the T1900/T1900C, and, if attached, disconnect the AC
adapter, power cord and all external cables connected to the computer.
2.
Remove the battery pack, optional memory card, optional PCMCIA card, top
cover, display mask, display assembly and inverter board as described in Sections
4.2, 4.3, 4.4, 4.5, 4.8, 4.9 and 4.13.
3.
Remove the M2.5x6 screw securing the LCD module to the LCD cover.
4.
Carefully rotate the LCD module from right to left out of the display cover and
disconnect the three display cables from the LCD module.
Figure 4-28 Removing the LCD Module
4-33