Running Test - Toshiba T1950 User Manual

3.19 Running Test

3.19.1 Function Description
This function automatically executes the following tests in sequence:
1. System Test (Subtest 01)
2. Memory Test (Subtests 01, 02, 04, 06, and 07)
3. Display Test (Subtests 01 to 08)
4. FDD Test (Subtest 02)
5. HDD Test (Subtests 01 and 05)
6. Real timer Test (Subtest 02)
7. Printer Test (Subtest 03)
8. Async Test (Subtest 01)
The system automatically detects the number of floppy disk drives connected to the T1900/
T1900C for the FDD test.
3.19.2 Operations
CAUTION: Do not forget to load a work disk in the FDD. If a work disk is not
loaded, an error will be generated during the FDD testing.
1. Remove the diagnostics disk from the floppy disk drive and insert the work
disk.
2. Select 6 (Running Test) from the Diagnostic Menu and press Enter. The
following message will be displayed:
Printer wraparound test (Y/N) ?
Selecting Y (yes) executes the printer wraparound test. Note that a printer
wraparound connector must be connected to the PRT/FDD port on the back of
the T1900/T1900C to properly execute this test.
3. Select Y or N and press Enter. The following message will appear:
Serial #A wrap around test (Y/N) ?
Selecting Y (yes) executes the ASYNC wraparound test. An RS-232-C
wraparound connector must be connected to the serial port on the back of the
T1900/T1900C to properly execute this test.
3-45