Toshiba T1950 User Manual page 146

To install the T1900's FL inverter board, follow the steps below and refer to Figures 4-32 and
4-33.
1. Connect the FL inverter cable and FL cables to CN1 and CN2 on the FL inverter
board (Figure 4-33).
2. Seat the FL inverter board and route the cables so they will not be pinched by the
display cover or other component.
3. Secure the FL inverter board with one M2.5x6 screw (Figure 4-33).
4. Set the display support plate in place and secure it with five M2.5x6 screws. One
screw also secures the display ground cable (Figure 4-32).
5. Install the display assembly, display mask, top cover, optional PCMCIA card,
optional memory card and battery pack as described in Sections 4.9, 4.8, 4.5, 4.4,
4.3 and 4.2.
4-39