4.18 T1900 Fluorescent Lamp (FL)
Removing the T1900 Fluorescent Lamp
To remove the T1900's Fluorescent Lamp, follow the steps below and refer to Figure 4-35.
1.
Turn off the power to the T1900/T1900C, and, if attached, disconnect the AC
adapter, power cord and all external cables connected to the computer.
2.
Remove the battery pack, optional memory card, optional PCMCIA card, top
cover, display mask, FL inverter, and LCD module as described in Sections 4.2,
4.3, 4.4, 4.5, 4.8, 4.9, 4.16, and 4.17.
3.
Peel off the tape from the lamp cover, then remove three M1.5x3 brass flat-head
screws securing the cover and take off the cover.
4.
Remove the fluorescent lamp.
4-42
Figure 4-35 Removing the Fluorescent Lamp