Toshiba T1950 User Manual page 48

4. To select the DIAGNOSTIC TEST menu from the DIAGNOSTICS MENU, set the
highlight bar to 1, and press Enter. The following menu appears:
TOSHIBA personal computer T1900 DIAGNOSTICS
version X.XX (c) copyright TOSHIBA Corp. 19XX
DIAGNOSTIC TEST MENU :
1 - SYSTEM TEST
2 - MEMORY TEST
3 - KEYBOARD TEST
4 - DISPLAY TEST
5 - FLOPPY DISK TEST
6 - PRINTER TEST
7 - ASYNC TEST
8 - HARD DISK TEST
9 - REAL TIMER TEST
10 - PCMCIA TEST
88 - FDD & HDD ERROR RETRY COUNT SET
99 - EXIT TO DIAGNOSTICS MENU
Refer to Sections 3.4 through 3.13 for detailed descriptions of Diagnostic Tests 1
through 10. Function 88 sets the floppy disk drive and hard disk drive error retry
count. Function 99 exits the submenus of the Diagnostic Test and returns to the
Diagnostic Menu.
5. Select the option you want to execute and press Enter. The following message
appears:
SYSTEM TEST
SUB-TEST : XX
PASS COUNT: XXXXX ERROR COUNT: XXXXX
WRITE DATA: XX
ADDRESS : XXXXXX STATUS
SUB-TEST MENU :
01 - ROM checksum
02 - HW status
03 - Version check
99 - Exit to DIAGNOSTIC TEST MENU
NOTE: The menu displayed by your T1900/T1900C may be slightly different from
the one shown above.
3-4
XXXXXXX
READ DATA : XX
: XXX
↑ ↓ → ← : Select items
Enter : Specify
Esc : Exit
T1900 DIAGNOSTIC TEST VX.XX
[Ctrl]+[Break]; test end
[Ctrl]+[C] ; key stop
↑ ↓ → ←
: Select items
Enter : Specify
Esc : Exit