Installing the Top Cover
To install the T1900/T1900C's top cover follow the steps below and refer to Figures 4-5 and
4-6.
1.
Place the top cover on the T1900/T1900C.
2.
Begin at the back and snap the top cover into place. Continue along the sides and
snap the front latches last (Figure 4-6).
3.
Secure the M2.5x10 screw above the keyboard and replace the screw cover
(Figure 4-6).
4.
Close the display and set the RGB and PRT port protective covers in place.
5.
Secure the four M2.5x6 silver screws at the back of the unit (Figure 4-5).
6.
Install the optional PCMCIA card, optional memory card and battery pack as
described in Sections 4.4, 4.3, and 4.2.
4-11