Toshiba T1950 User Manual page 142

4.15 T1900C Fluorescent Lamp (FL)
CAUTION: When you remove the FL, be careful not to let any dust or other foreign
matter enter the display panel components.
Removing the T1900C FL
To remove the T1900C's FL, follow the steps below and refer to Figures 4-29 through 4-31.
1. Turn off the power to the T1900/T1900C, and, if attached, disconnect the AC
adapter, power cord and all external cables connected to the computer.
2. Remove the battery pack, optional memory card, optional PCMCIA card, top
cover, display mask, display assembly, FL inverter board, and LCD module as
described in Sections 4.2, 4.3, 4.4, 4.5, 4.8, 4.9, 4.13 and 4.14.
3. Lay the color LCD module face down and use needle-nose pliers to unbend the 16
latches holding the front and back frames together. Then lift the unit out of the front
frame (Figure 4-29).
Figure 4-29 Unbending the Color LCD Module Latches
4-35