- Align the feeder with the mailing machine;
- Push the feeder towards the mailing machine (or the dynamic
- Insert the feeder screw into the mailing machine (or the dynamic
tightening knob (on the side)
4128511G/B
04/04/2007
1.2.4 Installation of the mixed-mail feeder (optional)
The mixed-mail feeder operates with an optical sensor
next to the feed platform. Thus, it should not be installed
in an area exposed to any excessive light source.
scale), taking care to keep the alignment using the centering
pin;
scale), then using the knob, tighten while pressing the screw to
lock it (if the units are not properly brought close together, gently
turn the gear protruding from the feeder and repeat the procedure):
20
Product overview
centering pin
(gear)
ORIG0062-20